YX-228C automatic strapping machine]

Description：imported aluminum alloy chip, 3 imported motor, 1 Mitsubshi brake motor, 4 imported OMRON electro-light switch, relay, to be belted 2 3 times, Schneider switch, South Korea’s LG AC contactor, PC control panel, working height 820mm, adjustable PP tape and PET tape, 9-17mm wide, 0.55-1.22mm thick, frame size: width 800MM*height 1000MMspeed：2.5 seconds/timesIt can be tailor-made.

1-1Application
The automatic packer adopts electronic image sensor and driving roll technology, no operator is needed, goods to be packed must be anywhere between width 850MM X height 600MM. Also the goods should not be damped, or powdered or too heavy (maximum 100kg). If you need pack this kind of stuff, please contact us for more details.

It’s suggested to use the tapes in compliance with the following requirements:
Raw materials: Polypropylene
Fixed width: maximum+/-1.0mm
Torque: maximum60 C/m
Arc: maximum 50mm/m
Width of coiling: miminum180mm to maximum 230mm
Coil I.D: minimum 200mm to maximum 406mm(fixed but adjustable)
Once the product is delivered, width of belt to be packed is fixed.
The company offers optional parts for different belts, if you intend to change the width of belt, please contact us.

1-2 Installation
The machine should be installed on dry, flat, and hard floor and close to the electrical source is a must.
The ground must meet the following conditions:
Indoor temperature: -20℃ to +50℃
Maximum load for ground 350kgs/square meter
Space: minimum 2mX1.5m
Check to see if the machine is hooked up to an electrical resource and transmission machine as they all must have same speed or its speed is less than that of the machine.
Power must be connected to the marked position of the machine.